SERIP-100Serial to Ethernet Converter & Device Server
SERIP-100 is proconX' low-cost Industrial device server offering one or two software selectable RS-232/422/485 serial ports and a 10 Mbit Ethernet port.
The SERIP-100 acts as an interface converter and connects a serial device
to Ethernet. It support a variety of different operating modes and can act as
client and server.
With it's DIN-rail enclosure and 10-30 V DC power supply it is easy to install in automation panels and switchboards. Cables are fed in from top and bottom and makes wiring of the communication ports easy.
The unit's firmware adheres to the Internet Standards (RFCs) as close a possible. This provides it with a high degree of compatibility with a broad range of available commercial and open source middleware, drivers and utilities.
Keeping in line with the proconX Range of products, the SERIP-100 features Web Page configuration and firmware upgrade over the network.
Operation
Connections
Documentation
| Manuals & Datasheets | |
|---|---|
| 2 page data sheet | |
| Installation guide | |
| User manual | |
| Application Notes | |
| TFTP Firmware upgrade | |
Software
| Software Tools | |
|---|---|
| Virtual COM port device driver (serial port emulator), serial port redirector and management tool, v1.4 | |
Specifications
Interfaces |
|
Ethernet |
1 |
Serial ports |
1, software configurable as either 1 x RS-232 or 1 x RS-485 or 1 x RS-422 |
User interface |
|
LED indicators |
Power (green), Ethernet link (green), 2 status (bi-color red/green) |
Monitoring & configuration |
Web browser based |
Diagnostic |
|
High availability features |
Watchdog supervision, brown-out detection |
Serial Port RS-232 interface |
|
Connector |
male 9-pin D-sub, DTE, EIA-574 pin-out |
Physical layer |
EIA-232-F |
Isolation |
non-isolated |
Signals |
RXD, TXD, RTS, CTS, DTR, DSR, DCD, RI |
Speed |
300, 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200 bps |
Serial Port RS-485/RS-422 interface |
|
Connector |
3.81 mm 6-pin pluggable terminal block header |
Physical layer |
EIA-485-A, 2-wire or 4-wire |
Isolation |
non-isolated |
Speed |
300, 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200 bps |
Max. number of nodes |
32 |
Ethernet port |
|
Connector |
8-pin RJ-45 socket for Cat 5 UTP |
Physical & Data Link Layer Layer |
IEEE 802.3i 10BASE-T |
Isolation |
1.5 kV galvanic |
Speed |
10 Mbit/s |
Max. cable length |
100 m (328 ft) |
Ethernet frame types |
802.3 |
Protocols |
TELNET (RFC 854, RFC 855, RFC 2217), HTTP, IP, TCP, ARP |
Concurrent connections |
1 virtual serial port, 2 HTTP |
Power supply |
|
Connector |
3.81 mm 2-pin pluggable terminal block header |
Voltage |
10-30 V DC |
Current |
30 mA typical @ 24 V DC |
Intrinsic consumption |
750 mW |
Electromagnetic compatibility |
|
Emissions (radiated and conducted) |
AS/NZS CISPR 22 / EN 55022 (Class A) |
Immunity |
EN 55024 |
Electrostatic discharge |
EN 61000-4-2 |
Radiated RF |
EN 61000-4-3 |
Fast transients |
EN 61000-4-4 |
Conducted RF |
EN 61000-4-6 |
Enclosure |
|
Material |
Self-extinguishing PC/ABS blend (UL 94-V0) |
Mounting |
35 mm DIN rail (EN 60715) |
Classification / Type rating |
IP 20 / NEMA Type 1 |
Cooling |
Convection |
Environmental |
|
Operating temperature |
0 to 60 °C / 32 to 140 °F |
Storage temperature |
-25 to 85 °C / -13 to 185 °F |
Humidity rating |
10 to 95% relative humidity, non condensing |
Operating ambience |
Free from corrosive gas, minimal dust |
Physical |
|
Dimensions |
101 x 22.5 x 120 mm / 3.98 x 0.886 x 4.72 in |
Weight |
0.12 kg / 0.265 lb |
Compliance |
|
Australia |
C-Tick |
Europe |
CE, RoHS |
USA |
FCC Part 15 (Class A) |
Canada |
ICES-003 (Class A) |
Ordering
proconX products can be ordered online from our web store:
Alternatively you can contact one of our distributors:
 Germany |
|---|
 |
|
egnite GmbH Erinstrasse 9 44575 Castrop-Rauxel Deutschland Telefon: +49 (0) 2305-441256 Fax: +49 (0) 2305-441487 Web: www.egnite.de |
Key Features
- Supported by Windows and Linux operating systems
- Integrated HTTP server for device commissioning and configuration via web browser
- Static or dynamic IP configuration via DHCP
- Telnet compliant (any port)
- Versatile modes of operation (Server, Client, UDP)
- Compatible with Serial/IP virtual serial port device driver for Windows from Tactical Software
- Compatible with the ttyd virtual device driver and Termpkg package for Linux
- Firmware upgradable
- Power-on self test and integrated watchdog for high availability
- Multiple configurations with 1 or 2 serial ports, RS-232, RS-485 or RS-422
- 10 Mbit Ethernet port
- Status LEDs
- DIN Rail mountable
- 10-30 V DC power supply