CAN-ETH CAN/Ethernet gateway
CAN-ETH is a CAN to Ethernet gateway specifically designed to interface CAN networks with TCP/IP networks.
The gateway features a CAN and an Ethernet port and can be mounted on a DIN rail. It encapsulates CAN messages into UDP packets and transports them via Ethernet. The gateway can operate in peer-to-peer or broadcast modes.
Usage and configuration of the gateway is simple and conveniently performed using a web browser which connects to the embedded web server.
Common applications include:
- CAN bus length extensions
- CAN to DSL bridging
- Wireless networking of CAN networks
Usage
Connections
Documentation
| Manuals & Datasheets | |
|---|---|
| 2 page data sheet | |
| CAN-ETH CAN/Ethernet gateway: Quick start reference guide | |
Ordering
proconX products can be ordered online from our web store:
Alternatively you can contact one of our distributors:
![]() |
![]() |
![]() |
![]() |
|
PM Control Systems (Aust) Pty Ltd Unit 1 / 1 Wirega Avenue Kingsgrove NSW 2208 Australia Phone: (02) 9758 2322 Fax: (02) 9750 6272 Web: www.pmcontrol.com.au |
egnite GmbH Erinstrasse 9 44575 Castrop-Rauxel Deutschland Telefon: +49 (0) 2305-441256 Fax: +49 (0) 2305-441487 Web: www.egnite.de |
VMS Energy de Mexico Homero 275 Col. Monraz Guadalajara, Jalisco CP 44670 Mexico Phone: +52 (33) 3813-1435 Web: www.vmsenergy.com |
CrystEl Systems LLC проспект Вернадского, д. 29, офис 609 119331 Москва Russia Тел. +7 499 138 08 90 Факс +7 499 138 08 95 Web: www.crystel.ru |
Features
- UDP encapsulation for CAN messages
- Peer-to-peer mode
- Broadcast mode
- 8 CAN receive filters
- Low configuration overhead, just an IP address and CAN bitrate to set-up
- Embedded web server for easy configuration and commissioning using a web browser
- Firmware upgradeable via Ethernet



